← Back to ESP32 Build Finder

ESP32 board comparison

Which ESP32 should you buy? Compare the chips and ready-made boards side by side: wireless, memory, pins, USB and extras, and what each one is best for.

The honest summary. Almost every project in the Build Finder runs on almost any Wi-Fi ESP32 (113 to 122 of 124). The boards differ in a handful of special abilities: Classic Bluetooth, USB keyboard mode, Zigbee/Thread, camera and screen support, and how many pins and how much memory you get. Pick for those, not for raw speed.

Which board should I pick?

If you want...ChooseWhy
To learn and follow tutorialsESP32 DevKit (classic)The most tutorials, libraries and forum answers; plenty of pins; Wi-Fi and Bluetooth. Start with the beginner's guide.
The cheapest, smallest Wi-Fi or BLE nodeESP32-C3 (SuperMini, XIAO)Very small and inexpensive, built-in USB. Fewer pins and no Classic Bluetooth.
Zigbee, Thread or Matter devicesESP32-C6 (or H2 if you do not need Wi-Fi)The only ones with an 802.15.4 radio. The C6 adds Wi-Fi 6.
A USB keyboard, mouse, MIDI or flash-drive deviceESP32-S3 (or S2)Only the S2 and S3 have USB OTG. The C3, C6 and H2 only have a serial/debug USB port.
Voice assistant, on-device AI or LVGL graphicsESP32-S3 with PSRAMMore memory, faster dual core and vector instructions for AI workloads.
A cameraESP32-S3 camera board (the XIAO ESP32-S3 Sense if you want it tiny, with a microphone and SD slot included), or ESP32-CAM if cost matters mostThe S3 boards have USB-C and more memory. The CAM is cheap but has no USB port and almost no free pins.
Bluetooth audio (A2DP) or Classic Bluetooth serialClassic ESP32 / WROVEROnly the original chip has Classic Bluetooth. Every newer chip is Bluetooth LE only.
True analog output (DAC) for audio or signalsClassic ESP32 (or S2)Only these have the built-in 8-bit DACs. Others need an I2S DAC module.
A touchscreen smart-home panelCYD (resistive) or JC2432W328C (capacitive)Screen, touch, microSD and light sensor are built in; very few free pins.
Lots of I/O (keypads, LED matrices, many sensors)Classic ESP32 or ESP32-S3The most usable pins. Avoid the C3, CAM and display boards.
Big buffers (web server, audio streaming, graphics)WROVER or S3 with PSRAMExtra external RAM on top of the built-in memory.

Chip specs

These are the chips inside the boards. Counts for GPIO and analog channels are the chip's totals; a real board exposes fewer.

SpecESP32
(classic)
ESP32-S2ESP32-S3ESP32-C3ESP32-C6ESP32-H2
CPU2 × Xtensa LX61 × Xtensa LX72 × Xtensa LX71 × RISC-V1 × RISC-V (+ low-power core)1 × RISC-V
Max clock240 MHz240 MHz240 MHz160 MHz160 MHz96 MHz
Internal RAM520 KB320 KB512 KB400 KB512 KB320 KB
Wi-FiWi-Fi 4 (2.4 GHz)Wi-Fi 4 (2.4 GHz)Wi-Fi 4 (2.4 GHz)Wi-Fi 4 (2.4 GHz)Wi-Fi 6 (2.4 GHz)None
BluetoothClassic + LE 4.2NoneLE 5LE 5LE 5.3LE 5.3
Zigbee / Thread (802.15.4)NoNoNoNoYesYes
USBNone on chip (needs a USB-serial chip)OTG (can be a device or host)OTG + serial/JTAGSerial/JTAG onlySerial/JTAG onlySerial/JTAG only
GPIO pins (chip)344345223019
Analog inputs (approx.)182020675
DAC (analog out)2 × 8-bit2 × 8-bitNoNoNoNo
Capacitive touch pins101414000
External PSRAMOptional (WROVER modules)Optional (some modules)Optional (up to 8 MB on common modules)NoNoNo
Best known forThe all-rounderWi-Fi + USB, cost focusedAI, USB, camera, displaysCheap and tinySmart home (Matter)Low-power Zigbee/Thread

Based on Espressif's published chip data. Counts are approximate; check the datasheet before designing a product. Espressif SoC overview.

Feature chart: all 12 boards in the Finder

FeatureESP32
DevKit
WROVERS2S3C3C6H2ESP32-CAMS3 cameraXIAO S3
Sense
CYD
2.8in
JC2432
W328C
Wi-Fi●Yes●Yes●Yes●Yes●Yes●Yes (Wi-Fi 6)–No●Yes●Yes●Yes●Yes●Yes
Bluetooth LE●Yes●Yes–No●Yes●Yes●Yes●Yes●Yes●Yes●Yes●Yes●Yes
Classic Bluetooth (audio, serial)●Yes●Yes–No–No–No–No–No●Yes–No–No●Yes●Yes
Zigbee / Thread / Matter-over-Thread–No–No–No–No–No●Yes●Yes–No–No–No–No–No
Can act as a USB keyboard / device (OTG)–No–No●Yes●Yes–No–No–No–No●Yes●Yes–No–No
Programs over USB with no adapter chip◐Board dependent◐Board dependent●Yes●Yes●Yes●Yes●Yes–No (needs an adapter)●Yes●Yes◐Board dependent◐Board dependent
Extra memory (PSRAM)–No●Yes◐Some modules◐Some modules–No–No–No●Yes (4 MB)●Yes●Yes (8 MB)–No–No
True analog output (DAC) on a usable pin●Yes●Yes●Yes–No–No–No–No–Pins not exposed–No–No–Pins in use–Pins in use
Capacitive touch pins●Yes●Yes●Yes●Yes–No–No–No–Pins not exposed◐Board dependent●Yes–Pins in use–Pins in use
Camera on the board–No–No–No–No–No–No–No●Yes●Yes●Yes–No–No
Screen and touch on the board–No–No–No–No–No–No–No–No–No–No●Yes (resistive)●Yes (capacitive)
microSD slot on the board–No–No–No–No–No–No–No●Yes◐Board dependent●Yes●Yes●Yes
Free pins for your own parts (approximate, varies by board)
Usable GPIO~25~20~30~30~13~20~14~6few~1132

● Yes   ◐ Depends on the board or module   – No. "Pins in use" means the chip can do it but the board uses those pins for something else.

Memory, pins and speed

Internal RAM (KB)

PSRAM (WROVER, S3 modules, cameras) adds more on top.

GPIO pins on the chip

A development board always exposes fewer than the chip has.

Maximum CPU clock (MHz)

Clock speed rarely matters for sensors and switches. It matters for graphics, audio and AI.

The ready-made boards

These come with extra hardware built in. That is convenient, but it uses up pins.

BoardChipBuilt inProgrammingFree pins
ESP32-CAM (AI Thinker)ESP32 (classic)OV2640 camera, 4 MB PSRAM, microSD slot, flash LEDNo USB port: needs a USB-serial adapter (or a programmer base)About 6, shared with the SD card
ESP32-S3 camera boards (S3-EYE, Freenove, others)ESP32-S3Camera (OV2640 / OV5640), PSRAM; many have a microphone and microSDUSB-C, built inFew; varies by board
Seeed Studio XIAO ESP32-S3 SenseESP32-S3OV2640 camera (on a detachable expansion board), 8 MB PSRAM, PDM digital microphone, microSD slot, battery chargerUSB-C, built inAbout 11 header pins, of which D8-D10 are shared with the SD card
Cheap Yellow Display (ESP32-2432S028)ESP32 (classic)2.8in 240x320 screen (ILI9341 or ST7789), resistive touch, microSD, light sensor, RGB LED, speaker outputUSB (micro or USB-C) via a serial chip3 (GPIO 22, 27, 35)
JC2432W328CESP32 (classic)2.8in 240x320 ST7789 screen, capacitive touch, microSD, light sensor, RGB LED, speaker outputUSB-C via a serial chip2 (GPIO 21, 22 on the expansion connectors)

Best for: each board in a nutshell

ESP32 DevKit (classic)

2 coresWi-Fi + Classic BT + LEDAC, touch

The default choice and the most documented.

Best for
Learning, Bluetooth audio, DAC output, projects with many parts, anything with lots of tutorials.
Think twice if
You need a USB keyboard, Zigbee/Thread, or the smallest, cheapest node.

See projects for this board →

ESP32-WROVER

Classic ESP32 + PSRAM4 to 8 MB extra RAM

The classic chip with extra memory on the module.

Best for
Audio streaming, web servers with big pages, cameras and graphics that need buffers.
Think twice if
You need every pin. GPIO 16 and 17 are used by the PSRAM.

See projects for this board →

ESP32-S2

1 coreWi-Fi onlyUSB OTGDAC, touch

Wi-Fi and USB without Bluetooth.

Best for
USB keyboard or macro pad, Wi-Fi gadgets, projects needing many pins and touch inputs.
Think twice if
You need Bluetooth at all, or a second CPU core.

See projects for this board →

ESP32-S3

2 coresWi-Fi + BLE 5USB OTGPSRAM options

The powerful, modern all-rounder.

Best for
Voice assistants, on-device AI, big displays (LVGL), USB devices, cameras, anything demanding.
Think twice if
You need Classic Bluetooth (A2DP) or a DAC. Costs more than a C3.

See projects for this board →

ESP32-C3

1 core RISC-VWi-Fi + BLE 5Cheap, tiny

The small, low-cost Wi-Fi and BLE chip.

Best for
Simple sensors and switches, many small nodes, Bluetooth proxies for Home Assistant, battery builds.
Think twice if
You need many pins, a USB keyboard, a DAC or heavy graphics. It cannot act as a USB keyboard.

See projects for this board →

ESP32-C6

Wi-Fi 6BLE 5.3Zigbee / Thread

Wi-Fi plus the smart-home radios.

Best for
Matter, Thread and Zigbee devices, future-proof Wi-Fi 6 nodes, low-power sensors.
Think twice if
You want maximum community examples (newer chip, fewer tutorials) or a USB keyboard.

See projects for this board →

ESP32-H2

BLE 5.3Zigbee / ThreadNo Wi-Fi

An ultra-low-power radio chip for mesh networks.

Best for
Battery Zigbee or Thread end devices that never need Wi-Fi.
Think twice if
You need Wi-Fi, lots of pins or more than a few projects. Only projects without a Wi-Fi requirement run on it.

See projects for this board →

ESP32-CAM (AI Thinker)

OV2640 cameramicroSDNo USB port

The classic cheap camera board.

Best for
Motion-triggered snapshots, doorbell cameras, simple streaming on a tiny budget.
Think twice if
You want to add parts (almost no free pins) or program it easily (needs an adapter and a jumper to GPIO 0).

See projects for this board →

ESP32-S3 camera board

CameraPSRAMUSB-C

The modern camera board.

Best for
Smarter cameras, face or object detection, doorbells, anything needing memory and easy flashing.
Think twice if
Free pins matter. They vary a lot between makers.

See projects for this board →

Seeed Studio XIAO ESP32-S3 Sense

CameraMicrophonemicroSDThumb-sized

A tiny camera board with a microphone and SD card slot already on it.

Best for
Wi-Fi cameras, time-lapse, voice or sound detection, and wearable or hidden builds where size matters. Its microphone is a digital PDM one, so no extra audio parts are needed.
Think twice if
You want to add many parts: the camera and SD card use most pins, and the SPI pins on the header are shared with the SD card.

See projects for this board →

Cheap Yellow Display (CYD)

2.8in screenResistive touchmicroSD

A screen, touch and ESP32 on one cheap board.

Best for
Dashboards, control panels, photo frames, small games, anything where the screen is the point.
Think twice if
You need to wire up many parts: only 3 pins are free. Touch is resistive (press, not swipe).

See projects for this board →

JC2432W328C

2.8in ST7789Capacitive touchmicroSD

The same idea with a smoother touchscreen.

Best for
Smart-home panels you tap and swipe, ESPHome and LVGL builds. There is a full build guide.
Think twice if
You need extra I/O: only 2 pins are free, and docs vary between board revisions.

See projects for this board →

Things the spec sheet does not tell you

Sources and notes

Chip data is from Espressif's published product information (espressif.com/en/products/socs) and datasheets, plus general knowledge of the common development boards. Analog channel counts and "usable GPIO" figures are approximations. The project fit comes from the capability data in the Build Finder, which lists 124 projects. Not affiliated with Espressif or any board maker.

← Back to the build finder